Makeover | DIY mailbox update

My mailbox has been in a sorry state for quite a while.

 Paint was chipping off of both the metal mailbox and the wood post that it sits on.

I finally did something about it this weekend, and I didn’t have to spend a penny. I had all of the necessary supplies (half a can of black satin spray paint; a smidge of leftover white primer and paint from the last time we painted the trim on our deck; and a partial roll of low-tack painter’s tape) in the basement.

After scraping off all the loose paint with a putty knife and giving the pieces a quick wash, I taped off the red flag and silver metal hardware. Then I sprayed the box with a thin coat of black paint.

I didn’t tape off the white post because I was going to paint that as soon as the black dried (and that only took a couple minutes).

The satin finish on the mailbox ended up buttery smooth. Next, I coated the post with some white primer (the old-fashioned way: with a brush) and when that dried, I covered the primer with paint (also the old-fashioned way).

If you’re wondering why the post has holes in it, it’s because it used to be part of my son’s backyard swingset/jungle gym. When he got too old for it and the set started showing its age, my husband disassembled it and reused some of the pieces. I kind of like the holes; they add a little character to the mailbox.

I wanted to paint our house number on the side of the box, so I went inside to create a template in Photoshop. I decided to use Century Gothic and upped the point size until the numbers were 7 inches tall. Width-wise, they just fit on a legal-size sheet of paper.

I rubbed a piece of white chalk across the back of the paper, then positioned the numbers where I wanted them on the mailbox and taped them down.

To get the chalk to transfer onto the mailbox, I outlined the numbers with a sharp pencil.

When I peeled off the tape and paper, the numbers were faint but readable on the side of the box.

Unfortunately, some of the paint peeled off along with the tape. (Grrr.) I decided to fill in the numbers with white paint first and worry about touching up the black later.

It took a couple coats of white for the numbers to cover the black box.

I touched up the spots where the tape had removed the black paint by squirting a dab of the spray paint into an empty plastic container, then painting it on with a detail brush. After I wiped off the rest of the chalk dust, the mailbox was ready for action.

Here’s the flag side:

And here’s the number side:

There are a couple of tiny tulips just poking up through the ground right now. When it warms up a little more, I’ll plant some other flowers and a vine of some kind there, too, with hopes that the vine will climb up the post.

7 Replies to “Makeover | DIY mailbox update”

  1. I love the update on your mailbox. And you would never know that you had to do touch-ups!

    Lisa, thank you so much for stopping by my blog and for the sweet words about my photography!! The blog is a two-fer for me…doing a little bit of writing and a little bit of photography (my first love)! Have a wonderful day!!

Leave a Reply

Discover more from Wisconsin Magpie

Subscribe now to keep reading and get access to the full archive.

Continue reading